¡Proveedor integral de soluciones de reciclaje de chatarra de cobre para su máquina de reciclaje de cables de cobre de chatarra!

Logotipo del fabricante de granuladores BSGH

Marca famosa china

Disfrute de una buena reputación entre nuestros clientes por su calidad, confiabilidad, innovación y alta tecnología con un buen servicio.

Proveedor profesional de soluciones para el reciclaje de chatarra de cobre.

WhatsApp
Facebook
Gorjeo
LinkedIn
Correo electrónico
Imagen destacada de la máquina granuladora de cobre BSGH “Cobre = dinero”

¿Cuánto cobre se puede reciclar y cuánto dinero podemos obtener?

Tabla de contenido

Introducción

In recent years, with the advancement of science and technology, humans have developed and used metals in nature at an increasingly higher level which are used in all walks of life, from construction, and manufacturing to the energy field and so on. Metal can also be damaged and aged, so a large amount of scrap metal is produced. How to make good use of this resource has dual significance for economic development and environmental protection. This article mainly introduces how much copper can be recycled using copper wire recycling machine and how much economic benefits this industry can bring to you?

How much copper can be recycled?

The copper content obtained within a certain time is mainly related to two factors: one is the copper content in the waste wire, and the other one is the processing capacity and efficiency of the copper wire granulator machine. These two factors work together to determine how much copper can be got in the end.

The content and quality of copper

The copper content contained in different cables are not the same. The most accurate way to estimate the copper content is to take a meter of cable, then calculate the cross-sectional area of copper in scrap wires, finally, you can use the formula to calculate the result:

1M copper content = density of copper * cross section * one meter.

We also listed the copper content of commonly used wires for your reference.

Tipo de cableCopper Percentage(%)
Square wire (1.5 Square)60~63
Square wire(2.5~4 Square)60~70
Network cable40~50
Communication wire60~73
Car wire50~58
Motorcycle wire30~33
Rubber wire28~30
Household plug wire15~30
Electric vehicle cable28~30
Copper Content Percentage reference table for different wire types, different kinds of cable have different copper content.

It is shown that the smaller the cable cross-section, the lower the copper percentage contained. If the cable is made of a copper-clad aluminum composite structure, the copper content depends on its diameter.

The efficiency and processing capacity of copper wire granulator machine

The higher the throughput and the faster the processing speed of the machine, the more copper it will recycle. BSGH Granulator machines are available in various models with different processing capacities. It can be mainly divided into three capacities: large, medium and small. Our large wire recycling machines, such as most of the N series copper wire granulators, have a processing efficiency of 700KG/H~2T/H. The medium-sized wire recycling machines, mainly Serie D, have a production capacity of 300KG/H~700KG/H. The processing capacity of Maquina granuladora pequeña es 50KG/H~300KG/H.

Each machine is fully automated, and even faced with different processing needs, it can process waste wires quickly and efficiently and also get high-quality copper products in a short time.

How much can we earn from waste wires?

The price of recycled copper is affected by many factors, such as: type, purity, market demand and different machines the customers use.

The types of copper

Different types of copper have different prices. The most commonly used material in the manufacture of cable copper wires is high-purity electrolytic copper, whose purity can reach more than 99.95%. This copper material has high conductivity and good plasticity It can be used to manufacture wires of various specifications and shapes, and is widely used in fields such as power and communication transmission. its price is relatively high. Red copper also known as brass is an alloy material containing about 20%-40% zinc and a small amount of other elements. Its conductivity is lower than that of high-purity electrolytic copper, but it has higher strength, hardness and corrosion resistance. It is widely used in the manufacture of ordinary cables and communication wires. It also has a great price. Copper-clad aluminum means aluminum on the inside and copper on the outside. Mainly used in thin wires such as BVR, the price is about ¥35/kg, the price is relatively cheap.

High-purity electrolytic copper & Red Copper & Copper-clad aluminum

The purity of copper product

The higher the purity of copper, the more expensive it is. BSGH Granulator constantly updates our technology and adopts high technology to recycle copper. We have eliminated the high-pressure separation devices previously on the market and use separadores de aire y vibrating tables to recover copper. Not only that, we also have separadores electrostáticos to separate wires as thin as hair and some difficult-to-process miscellaneous wires. These devices can enhance the purity and efficiency of recycled copper. The purity can reach 99.99%.

The demand of copper

The world’s copper resource situation is actually not optimistic. The existing copper metal cannot meet the needs of various industries, so the recycling of scrap metal is particularly important. In recent years, many countries have continued to increase their support for related industries. Therefore, participating in this industry is in line with the trend of the times and caters to national policies, which will definitely bring considerable economic benefits.

Specific benefit analysis of copper wire granulator

Various processing capacities of the machine generate different profits per day. So we provide specific benefit analysis of BSGH Granulator machines with two capacities which can help people know how much they can earn clearly.

This analysis aims to evaluate the revenue generation potential, production costs, market demand dynamics, and competitive landscape. By assessing these elements, we can ascertain the profitability margins, return on investment, and overall viability of the copper granulator machine within copper recycling market. Through meticulous financial scrutiny and strategic forecasting, we aim to provide actionable insights to optimize profit generation and enhance the economic sustainability of the copper cable granulating machine venture.

The table below shows the specific benefit analysis of BS-ECO1000 Granulador de alambre de cobre:

Costo de funcionamiento por día ($)

AporteCables de chatarra de automóvilesConsumo de energíaTrabajadores
Cantidad8T76KW/H*8H*0,7=425,62 trabajadores
Precio unitario4691/T0.1450/día
Costo de entrada3752860100
Costo total//37688
Total cost per day.

Ingresos por día ($)

ProducciónCobrePlástico
Cantidad8*55%=4,4T3,6T
Precio10008/T300/T
Ingreso44035.21080
Ingresos totales/45115.2
Total income per day.

Daily Profit = USD 45115.2– USD 37688= USD 7427.2

The table below illustrates a specific benefit analysis of BS-N125 Middle Copper Wire Granulator:

Costo de funcionamiento por día ($)

AporteCables de chatarra de automóvilesConsumo de energíaTrabajadores
Cantidad5T40.5KW/H*8H*0.7=226.8KW2 trabajadores
Precio unitario4691/T0.1430/Day
Costo de entrada2345531.860
Costo total//23546.8
Total cost per day.

Ingresos por día ($)

ProducciónCobrePlástico
Cantidad5*55%=2.75T2.25T
Precio10008/T300/T
Ingreso27522675
Ingresos totales/28197
Total income per day.

Tips: The data in these tables are only for reference. You can use the elements in the table to calculate the profit based on your exact data.

Daily Profit = USD 28197– USD 23546.8= USD 4650.2

You can see from above data, different kinds of machine will take different profit for you, your invest will mostly decide your revenue, so choose the proper machine to get more reasonable money for your life.

Conclusión

All in all, how much copper can be recycled and how much revenue can be derived from it is mainly determined by the above factors. The potential of the scrap metal recycling industry is huge, if you want to know more information, you can contact us at any time.

Granulador bsgh contáctenos código qr
Imagen de Jocy Wang

Jocy Wang

Fabricante líder en el campo de las máquinas para reciclar chatarra de cobre desde hace más de 25 años. Principalmente atendemos a grandes clientes. Ofrecer buenas máquinas es nuestra mayor ventaja.

Deja una respuesta

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

Acerca de Más información y conocimiento

Máquina granuladora de cables
Jocy Wang

Máquina de reciclaje de cables de China vs. Máquina de reciclaje de cables del extranjero

Como fabricante y exportador profesional de máquinas de reciclaje de cables, sabemos que muchos clientes no conocen la diferencia entre las máquinas de reciclaje de cables de China y las máquinas de reciclaje de cables del extranjero, especialmente cuando compran una máquina, ¿cómo elegir? Creo que tendrá un conocimiento más profundo sobre la diferencia entre los granuladores de reciclaje de cables de China y del extranjero después de leer este blog.

Leer más "
Granulador de alambre BS-N130
Jocy Wang

¿Cómo funciona un granulador de cable?

En términos generales, la máquina granuladora de cobre se compone de tres partes: trituradora principal, separador de aire y pequeña mesa de vibración, estas 3 partes son esenciales y también puede configurar diferentes equipos de acuerdo con las características de los cables de desecho. 10 consejos le ayudan a saber cómo funciona la máquina granuladora de cables, le ayudará mucho, léalo ahora.

Leer más "
es_ESSpanish

Maquina recicladora de radiadores

Estructura de la máquina de reciclaje de radiadores.

Disponemos de todo tipo de máquinas de reciclaje de radiadores, además de máquinas peladoras de radiadores individuales y líneas de reciclaje de radiadores, máquinas de corte de radiadores.

Nuestras máquinas son capaces de procesar todo tipo de radiadores de desecho, incluidos radiadores de automóviles, radiadores de tanques de agua y radiadores de aire acondicionado, radiadores revestidos de aluminio, etc.

Prensa hidráulica de metal

fabricante de máquinas empacadoras de automóviles

Nuestra empacadora de metales puede procesar todo tipo de chatarra, además de metales ligeros y metales pesados, metales ferrosos y metales no ferrosos;

Nuestras máquinas tienen desde pequeña presión hasta gran presión 80T, 125T, 135T, 160T, 200T, 250T, 315T y 400T, si no sabe qué presión debe elegir, envíenos una imagen de su material a continuación y solicite una cotización gratis ahora.

Cuéntame tus peticiones

Tenemos:

  • Trituradoras de un solo motor
  • Trituradoras de doble motor
  • Potencia desde 3KW hasta 500KW y más
  • Todas las trituradoras se personalizan según la materia prima del cliente.
  • Nuestra máquina puede triturar: todo tipo de metales, plástico, palets de madera, etc.
  • Material de las cuchillas de la trituradora: H13, SKD-11 y soporte personalizado.
  • Cantidad de dientes de la trituradora: según los diferentes tipos de máquina, los dientes también son diferentes.
  • Precio de la trituradora: desde USD 4900 a USD 300 000
  • Tipo de trituradora: trituradora común y trituradora de motor hidráulico.

¿Puede decirme qué tipo de material desea procesar? Haga clic a continuación y envíe una imagen del material.

Logotipo del fabricante de granuladores BSGH

Motor eléctrico normal

Carcasa del motor de proceso | Estator del motor | Eje del motor

Máquina de reciclaje de motores de nueva energía

Corte de carcasa de motor | Reciclaje de estator de motor

Máquina de reciclaje de arranque de automóvil

Corte de arranque de automóvil | Prensado de arranque de automóvil | Calentamiento de arranque de automóvil | Máquina de tracción de arranque de automóvil

Reciclaje de alternadores de automóviles

Máquina cortadora de alternadores de automóviles | Máquina extractora de alternadores de automóviles

Planta de reciclaje de motores

Línea de reciclaje de estatores de motores | Línea de reciclaje de rotores de motores | Planta de reciclaje de motores completa

Maquina de reciclaje de transformadores

Para el reciclaje de transformadores pequeños

Máquina de reciclaje de compresores

Máquina cortadora de carcasas de compresores | Reciclaje de estatores de compresores

Reciclaje de motores de ventiladores de techo

Principalmente para reciclar motores de ventiladores de techo.

Reciclaje de interruptores magnéticos para automóviles

Para todo tipo de interruptores magnéticos de coche

Reciclaje de motor de buje trasero de bicicleta eléctrica

Para todo tipo de motores de buje de bicicletas eléctricas

Máquina de prensa hidráulica

Principalmente para prensar todo tipo de piezas de motor | Soporte personalizado

DIME¿Qué tipos de motor procesas?

Envíe su solicitud

Por favor, rellene el siguiente formulario (cuéntenos sus solicitudes o puede elegir entre):

Serie D Capacidad diferente
50 kg/h, 70 kg/h, 100 kg/h, 200 kg/h, 300 kg/h
Serie N Capacidad Diferente
300~500 kg/h, 400~600 kg/h, 1 tonelada/h, 1200~1500 kg/h

De acuerdo con las diferentes capacidades anteriores, cuéntenos sus solicitudes, una vez que obtengamos su información detallada para sus solicitudes, nos comunicaremos con usted lo antes posible con soluciones profesionales y soporte desde la compra hasta el uso.