• Ciudad de Taizhou, Zhejiang, China
  • cobregranulator@bsghrecycling.com

¡Proveedor integral de soluciones de reciclaje de chatarra de cobre para su máquina de reciclaje de cables de cobre de chatarra!

Logotipo del fabricante de granuladores BSGH
Menú principal

Máquina desforradora de radiadores para separar tubos de cobre y aluminio

máquina desmontadora de radiadores
máquina desmontadora de radiadores
Separador de aluminio y cobre para radiador
Máquina peladora de radiadores de varios juegos
copper aluminum separator

Máquina desforradora de radiadores para separar tubos de cobre y aluminio

  1. Compact structure, save space;
  2. High efficiency with 3T/Day;
  3. Fully separate the aluminum foil and copper tube one time, without any copper loss and pollution;
  4. Single layer or 2 layer can be stripped directly;
  5. Standard machine suitable for copper tube center distance in levels of 19mm,21mm and 25mm, other radiator size can becustomized;
  6. Yoide application in radiators, such as air conditioner radiators, car radiators, elater tank radiators, etc.
Enviar una consulta

Detalles del producto

BS-1200P radiator stripping machine was invented by BSGH with CE certificate, the first inventor in the world for this kind of material. The radiator stripper machine is suitable for flat and uncurved scrap radiators from the air conditioner, car/auto radiators or water tank radiators.
Standard machine can process 3 or 5 different copper tube center distances at most; Usually, most of the scrap radiators in the market are 19mm,21mm and 25mm. If your scrap radiator has other distances, pls let us know. We will customize the machine for you.
BS-1200P consisted of a frame,2 motors and 2 reduction gearboxes, a feeding panel for scrap radiator material, cutting parts, transmission parts, and material separation parts. This machine proved to be the best choice for recycling used radiators.

Descripción del vídeo

In this video, we’ll show you how to efficiently recycle a double-layer radiator with 25MM centerlines between two copper pipes.

  • Cliente: EE.UU.
  • Order: 4Sets Radiator Stripping Machine + 4Sets Band Saw
  • Most of our customer radiators are 25MM and 21MM.

To ensure the complete separation of the copper tube and aluminum foil in a single operation, the worker does the following:

  • First, ensure that the left side of the radiators aligns with the left side of the Material Inlets. Make sure the first copper pipe in the upper layer is closer to the guiding ruler.
  • Then after pushing the radiators into Material Inlets, the feeding gears will securely grip them, smoothly feed them into the machine and complete the entire separation process automatically.

Leading radiator stripping machine bS-1200P Manufacturer

BS-1200P radiator stripping machine is an innovative equipment also the first one of this kind, used for separating copper pipes from aluminum. Designed and manufactured by BSGH Granulator, patent No. of ZL201110259421.2, compact structure practical and economical, taking up a small area and already has more than 10 years, still the most popular machine in the world for processing radiators.

Artículo Technical Datails of BS-1200P Radiator Stripping Machine
Fuerza 3+4KW with 2 Reduction Gearbox
Voltaje 380V or Customized, 50HZ/60HZ
Capacidad 3T/8H
G.W. / N.W. 650/600KG
Packing Size L1800*W950*H1300
Radiator Size Copper tube center distance are 19MM, 21MM and 25MM
Belt Triangle belt: A Type (1200mm); B Type (1200mm)

If you think this model can’t meet your demands, you can check our BS-1200S model, upgrade on the basis of BS-1200P.

Difference between BS-1200P and BS-1200S:

Modelo BS-1200P BS-1200S
Caja de cambios reductora Normal Enlarged
Eje de la máquina 1***MM Extended Shaft
Rango de procesamiento (MM) 19, 21 and 25 25, 22, 21, 19 and 17.5
Customized Your Machine

Notice Before Working:

Before delivery, the machine is already adjusted to the condition for processing radiators on the main market (19mm, 21mm, 25mm).
1.Check if the power is connected well;
2.Check if the Guiding Rulers for each part is at the right position;
3.Check if the two Adjusting Wheels of each pair (total three) are on same level;
4.Start the machine and check if the machine is running at the right direction.

Material Preparation:

Iron heads of radiators must be cut off by a band saw or electric hammer.

Radiators must be cut with a band saw according to the width of each Material Inlet;

Radiators that are more than 2 layers must be cut into one layer or two layers with the band saw; Do not feed radiators into the wrong Material Inlets (three inlets each are for 19mm, 21mm and 25mm radiators respectively);

This machine is suitable for processing one-layer radiators and 2layer radiators directly. When you need to process two-layer radiators, just remove the handle away from the present location. 

  1. When two-layer radiators are processed, the left side of the radiators shall touch the left side of each Material Inlet, and the first copper pipe in the Upper Layer to the left side of each Material Inlet must be nearer than the first copper pipe in the Lower Layer to the Left Side of each Material Inlet.
  2. For both one-layer and two-layer radiators, the left side of the radiators must touch the Guiding Rulers and radiators must be fed into Material Inlets along the guiding ruler.
  3. When radiators are fed into Material Inlets correctly, each Feeding Tooth at the Material Inlet must be in the middle of each two copper pipes; or else copper pipes and aluminum will not be separated.

Twisted radiators or Irregular radiators can not be processed.

Processing of radiator stripping machine:

  1. Turn the Reversing Switch and check the rotating direction.
  2. Inject oil into the two oil holes on the left and right side of the machine to lubricate transmission gears (normally once per 4 working hours).
  3. Push different radiators into different Materials inlet according to their specs (19mm, 21mm, 25mm); the left side of radiators must touch the left side of the Material Inlets; or, the right side of radiators must touch the right side of Material Inlets (the first copper pipe in the Lower Layer shall be nearer to the Guiding Ruler, different with Ⅳ.6); when radiators are pushed into Material Inlets, Feeding Gears will gnaw at radiators and take them into the machine.
  4. According to the layers of radiators and their height, adjust each pair of Adjusting Wheels on the machine (after adjusting, tighten the screws below).
  5. After radiators are taken into the machine, copper pipes and aluminum are separated and come out of the machine.

FAQ about BS-1200P radiator stripping machine

This machine can handle radiators with center distances of 19mm, 21mm, and 25mm. If you have radiators with other center distances, just contact us to customize your machine.

Here’s how many copper pipes it can process for each center distance:

When the radiator center distance is 25mm, it can process up to 14 copper pipes. The maximum width of the radiator it can handle is 360mm.
When the radiator center distance is 21mm, it can process up to 10 copper pipes. The maximum width of the radiator it can handle is 220mm.
When the radiator center distance is 19mm, it can process up to 10 copper pipes. The maximum width of the radiator it can handle is 180mm.BS-1200P radiator stripping machine inlet panel data

BS-1200P radiator stripping machine requires three-phase voltage to operate, not recommended to use single-phase voltage.

One-layer and 2 layer radiators can be processed directly. However, when dealing with three or four-layer radiators, you’ll need to use a band saw to make the necessary cuts.

The machine can work as long as you need, but it’s better to take a break every 4 hours to cool down the machine, Thus you can have a better working experience and extend the machine’s lifespan.

  1. The first row of handles is for adjusting the raw material inlet teeth.
  2. The second row of handles is for blade adjustment.
  3. The third row of handles is used to adjust the radiator outlet. Make sure that both left and right handles are adjusted simultaneously.

Customer Testimonial of radiator stripping machine BS-1200P

I’ve tried many recycling machines, but BS-1200P stands out. It’s super efficient. I’m extremely satisfied!

This machine is super efficient; it’s easy to operate and adjust. It processes materials in just a few minutes, saving both time and cost.

The Radiator Recycling Machine BS-1200P has made my work so much easier, The versatility with three processing ranges and the ability to customize it to my needs is fantastic. I can’t recommend it enough!

Productos relacionados

BSGH Granulator se especializa en la producción de equipos de reciclaje de granuladores de cobre.
Nuestra empresa tiene como objetivo brindar el servicio más superior a los clientes y servir productos de la más alta calidad a los clientes.

COMPAÑÍA

Productos

PRODUCTOS

Contáctenos

  • 008613772508206
  • cobregranulator@bsghrecycling.com
  • Taizhou, Zhejiang, China
es_ESSpanish
es_ESSpanish en_USEnglish pt_PTPortuguese de_DEGerman fr_FRFrench

Envíe su solicitud

Por favor, rellene el siguiente formulario (cuéntenos sus solicitudes o puede elegir entre):

Serie D Capacidad diferente
50 kg/h, 70 kg/h, 100 kg/h, 200 kg/h, 300 kg/h
Serie N Capacidad Diferente
300~500 kg/h, 400~600 kg/h, 1 tonelada/h, 1200~1500 kg/h

De acuerdo con las diferentes capacidades anteriores, cuéntenos sus solicitudes, una vez que obtengamos su información detallada para sus solicitudes, nos comunicaremos con usted lo antes posible con soluciones profesionales y soporte desde la compra hasta el uso.

Maquina recicladora de radiadores

Estructura de la máquina de reciclaje de radiadores.

Disponemos de todo tipo de máquinas de reciclaje de radiadores, además de máquinas peladoras de radiadores individuales y líneas de reciclaje de radiadores, máquinas de corte de radiadores.

Nuestras máquinas son capaces de procesar todo tipo de radiadores de desecho, incluidos radiadores de automóviles, radiadores de tanques de agua y radiadores de aire acondicionado, radiadores revestidos de aluminio, etc.

Prensa hidráulica de metal

fabricante de máquinas empacadoras de automóviles

Nuestra empacadora de metales puede procesar todo tipo de chatarra, además de metales ligeros y metales pesados, metales ferrosos y metales no ferrosos;

Nuestras máquinas tienen desde pequeña presión hasta gran presión 80T, 125T, 135T, 160T, 200T, 250T, 315T y 400T, si no sabe qué presión debe elegir, envíenos una imagen de su material a continuación y solicite una cotización gratis ahora.

Cuéntame tus peticiones

Tenemos:

  • Trituradoras de un solo motor
  • Trituradoras de doble motor
  • Potencia desde 3KW hasta 500KW y más
  • Todas las trituradoras se personalizan según la materia prima del cliente.
  • Nuestra máquina puede triturar: todo tipo de metales, plástico, palets de madera, etc.
  • Material de las cuchillas de la trituradora: H13, SKD-11 y soporte personalizado.
  • Cantidad de dientes de la trituradora: según los diferentes tipos de máquina, los dientes también son diferentes.
  • Precio de la trituradora: desde USD 4900 a USD 300 000
  • Tipo de trituradora: trituradora común y trituradora de motor hidráulico.

¿Puede decirme qué tipo de material desea procesar? Haga clic a continuación y envíe una imagen del material.

Logotipo del fabricante de granuladores BSGH

Motor eléctrico normal

Carcasa del motor de proceso | Estator del motor | Eje del motor

Máquina de reciclaje de motores de nueva energía

Corte de carcasa de motor | Reciclaje de estator de motor

Máquina de reciclaje de arranque de automóvil

Corte de arranque de automóvil | Prensado de arranque de automóvil | Calentamiento de arranque de automóvil | Máquina de tracción de arranque de automóvil

Reciclaje de alternadores de automóviles

Máquina cortadora de alternadores de automóviles | Máquina extractora de alternadores de automóviles

Planta de reciclaje de motores

Línea de reciclaje de estatores de motores | Línea de reciclaje de rotores de motores | Planta de reciclaje de motores completa

Maquina de reciclaje de transformadores

Para el reciclaje de transformadores pequeños

Máquina de reciclaje de compresores

Máquina cortadora de carcasas de compresores | Reciclaje de estatores de compresores

Reciclaje de motores de ventiladores de techo

Principalmente para reciclar motores de ventiladores de techo.

Reciclaje de interruptores magnéticos para automóviles

Para todo tipo de interruptores magnéticos de coche

Reciclaje de motor de buje trasero de bicicleta eléctrica

Para todo tipo de motores de buje de bicicletas eléctricas

Máquina de prensa hidráulica

Principalmente para prensar todo tipo de piezas de motor | Soporte personalizado

DIME¿Qué tipos de motor procesas?