BS-1200P Radiator Stripping Machine | Copper Aluminum Separator for AC Radiators

BS-1200P Radiator Stripping Machine for Copper Tube and Aluminum Foil Separation

分类 Radiator Recycling Machine

BS-1200P radiator stripping machine from bsgh granulator front side

BS-1200P radiator stripping machine blue yellow clor with band saw

BS-1200P Radiator Stripping Machine for Copper Tube and Aluminum Foil Separation

Suitable for regular radiators from air conditioner radiators, car radiators, water tank radiators, etc.
High processing capacity with 3T/Day;
100% copper tube separate rate from aluminum foil in one shot, no copper loss;
Single layer or 2 layer can be stripped directly;
Standard machine suitable for copper tube center distance in levels of 19mm, 21mm and 25mm;
BS-1200P supports customization for voltage, color, center distances of two copper tubes, feeding panel and logo etc.

products details

BS-1200P radiator stripping machine was invented by BSGH Granulator with CE certificate, the first inventor in the world for this kind of material. It currently commands a 99.8% share of Chinese radiator recycling market. BS-1200P can directly process your 1-2 layer regular scrap radiators from air conditioner, car/auto radiators or water tank radiators.
Standard BS-1200P stripping radiator machine can process 3 copper tube center distances; Usually, most of the scrap radiators in the market are 19mm, 21mm and 25mm. If your scrap radiator has other distances, pls let us know. We will customize the machine for you.
BS-1200P consisted of a frame, 2 motors and 2 reduction gearboxes, a feeding panel for scrap radiator material, cutting parts, transmission parts, and material separation parts. This machine is proved to be the best choice for recycling used radiators.

video description

In this video, we’ll show you how to efficiently recycle a double-layer radiator with 25MM centerlines between two copper pipes.

Customer: USA
Order: 4 Sets BS-1200P Radiator Stripping Machine + 4 Sets Band Saw
Most of our customer radiators are 25MM and 21MM.

To ensure the complete separation of the copper tube and aluminum foil in a single operation, the worker does the following:

First, ensure that the left side of the radiators aligns with the left side of the Material Inlets. Make sure the first copper pipe in the upper layer is closer to the guiding ruler.
Then after pushing the radiators into Material Inlets, the feeding gears will securely grip them, smoothly feed them into the machine and complete the entire separation process automatically.

Leading bS-1200P radiator stripping machine Manufacturer

BS-1200P radiator stripping machine is an innovative, industry-leading solution engineered to efficiently separate copper pipes from aluminum. Proudly designed and manufactured by BSGH Granulator under patent No. ZL201110259421.2, BS-1200P features a highly compact, space-saving footprint. With over a decade of proven performance, it continues to be the most popular and trusted machine globally for processing scrap radiators.

Item	Technical Datails of BS-1200P Radiator Stripping Machine
Power	3+4KW with 2 Reduction Gearbox
Voltage	380V or Customized, 50HZ/60HZ
Capacity	3T/8H
G.W. / N.W.	650/600KG
Packing Size	L1800W950H1300
Radiator Size	Copper tube center distance are 19MM, 21MM and 25MM
Belt	Triangle belt: A Type (1200mm); B Type (1200mm)

If you think this model can’t meet your demands, you can check our BS-1200S radiator stripping machine, upgrade on the basis of BS-1200P.

Difference between BS-1200P and BS-1200S

Model	BS-1200P	BS-1200S
Reduction Gearbox	Normal	Enlarged
Machine Shaft	1***MM	Extended Shaft
Processing Range(MM)	19, 21 and 25	25, 22, 21, 19 and 17.5

Notice Before Working

Before delivery, the machine is already adjusted to the condition for processing radiators on the main market (19mm, 21mm, 25mm).
1.Check if the power is connected well;
2.Check if the Guiding Rulers for each part is at the right position;
3.Check if the two Adjusting Wheels of each pair (total three) are on same level;
4.Start the machine and check if the machine is running at the right direction.

Material Preparation

About Iron Head of Radiators

Iron heads of radiators must be cut off by a band saw or electric hammer.

Input Material Width

Radiators must be cut with a band saw according to the width of each Material Inlet;

Multi Layer Radiators

Radiators that are more than 2 layers must be cut into one layer or two layers with the band saw; Do not feed radiators into the wrong Material Inlets (three inlets each are for 19mm, 21mm and 25mm radiators respectively);

Machine Function

This machine is suitable for processing one-layer radiators and 2layer radiators directly. When you need to process two-layer radiators, just remove the handle away from the present location.

Notice When Processing

When two-layer radiators are processed, the left side of the radiators shall touch the left side of each Material Inlet, and the first copper pipe in the Upper Layer to the left side of each Material Inlet must be nearer than the first copper pipe in the Lower Layer to the Left Side of each Material Inlet.
For both one-layer and two-layer radiators, the left side of the radiators must touch the Guiding Rulers and radiators must be fed into Material Inlets along the guiding ruler.
When radiators are fed into Material Inlets correctly, each Feeding Tooth at the Material Inlet must be in the middle of each two copper pipes; or else copper pipes and aluminum will not be separated.

Which Kinds of Radiator Can't be Processed?

Twisted radiators or Irregular radiators can not be processed.

Processing steps of BS-1200P radiator stripping machine

Turn the Reversing Switch and check the rotating direction.
According to the layer and height of your radiators, adjust each pair of adjusting wheels on the machine then tighten the screws below.
Push your radiators into suitable inlet (19mm, 21mm, 25mm), pay attention: the left side of radiators must touch the left side of material Inlets, then feeding gears will bite radiators and take them into the machine.
In seconds, copper pipes and aluminum are separated and come out.

Raw materials & final products

Our BS-1200P radiator stripping machine efficiently processes standard radiators, yielding 100% pure copper tubes and aluminum fins, suitable for entry-level recyclers with small investments.

Reliable Packaging & Shipping of BS-1200P

Secure Packaging: Carefully wrapped in protective film and sealed in a robust plywood crate to prevent any transit damage.
Flexible Shipping: LCL (Less than Container Load) shipping is available for cost-effective delivery.
Easy Tracking: Real-time shipment tracking is supported using your Bill of Lading (B/L).

Customer Testimonial of BS-1200P radiator stripping machine

Rated 5 out of 5

“I’ve tried many recycling machines, but BS-1200P stands out. It’s super efficient. I’m extremely satisfied!”

Rated 5 out of 5

“BS-1200P is super efficient; it’s easy to operate and adjust. It processes materials in just a few minutes, saving both time and cost.”

Rated 5 out of 5

“BS-1200P has made my work so much easier, its versatility with three processing ranges and the ability to customize it to my needs is fantastic. I can’t recommend it enough!”

FAQ about BS-1200P radiator stripping machine

What sizes of radiator can BS-1200P radiator stripping machine handle?

BS-1200P radiator stripping machine can handle radiators with center distances of 19mm, 21mm, and 25mm. If you have radiators with other center distances, just contact us to customize your machine.

Here’s how many copper pipes it can process for each center distance:

When the radiator center distance is 25mm, it can process up to 14 copper pipes. The maximum width of the radiator it can handle is 360mm.
When the radiator center distance is 21mm, it can process up to 10 copper pipes. The maximum width of the radiator it can handle is 220mm.
When the radiator center distance is 19mm, it can process up to 10 copper pipes. The maximum width of the radiator it can handle is 180mm.

What voltage is required for BS-1200P radiator stripping machine?

BS-1200P radiator stripping machine requires three-phase voltage to operate, not recommended to use single-phase voltage.

How long can BS-1200P radiator stripping machine run continuously?

BS-1200P radiator stripping machine needs to take a break every 4 hours to cool down the machine, Thus you can have a better working experience and extend the machine’s lifespan.

Can I feed radiators into three inlets of BS-1200P radiator stripping machine at the same time?

Sorry, you can’t. BS-1200P can only process one piece of radiator each time.

When do the blades of BS-1200P radiator stripping machine need to be replaced?

We recommend checking the blade condition after processing approximately 300 tons of scrap radiators. Depending on the wear condition, you only need to replace a few specific blades rather than the entire set.

Is BS-1200P radiator stripping machine easy to operate?

Yes, BS-1200P is easy to operate. Simply place the corresponding size of radiators into the correct material inlets and the machine will process them automatically. We also provide a detailed English user manual to help you operate BS-1200P smoothly.

Can BS-1200P radiator stripping machine process multi-layer radiators?

Yes, but you need to use a band saw to cut them into one or two layers first then BS-1200P radiator stripping machine can directly handle.