I. Introduction
If you walk into some scrapyard or appliance recycling center, you’ll see discarded compressors piled up, mainly from old refrigerators, air conditioners, and industrial units. Most people just regard them as bulky, heavy scrap metal, but if we look closer, they are actually hidden treasure of valuable resources.
So what exactly is a compressor?
Think of it as the heart of a refrigeration system, from your home fridge to a large industrial air conditioner. Just like the heart pumps blood, the compressor’s task is to “pump” the lifeblood of the refrigeration system – refrigerant – dramatically increasing its pressure and temperature to drive the entire refrigeration cycle. When appliances reach the end, the compressor is far from dead but becomes one of the most valuable components for recycling.
This article will dive deeper into the value of scrap compressors and how to recycle them professionally, safely, and efficiently.
II. Understanding Scrap Compressors
To make a smart investment in compressor recycling, you need a clear understanding of three key areas: the different types of compressors, their internal composition, and most importantly how these factors determine their final scrap value.
1. Common Compressor Types
Scrap yards typically encounter compressors from three main sources:
2. Core Material Composition & Value Analysis
A compressor is a sealed unit containing a variety of metals and other materials. Disassembling a compressor you can find several key components:
Outer Casing: Usually made of high-strength steel, sturdy and durable, protecting the internal structure.
Moteur: High-value core, consisting of two parts: the stator and the rotor.
- Stator: Contains a large number of high-purity copper windings and the silicon steel core.
- Rotor: Usually made of copper or aluminum, with a central shaft made of high-strength steel.
Internal Moving parts: Depending on the compressor’s design (e.g., piston, scroll, or rotary), you may find other metal components including pistons, connecting rods, and valves, which are frequently made from durable aluminum or steel alloys.
Non-Metallic Components: Seals, gaskets, and the wiring junction box are usually made of rubber or plastic, although taking up a very small fraction and having minimal scrap value, proper disposal is needed during the recycling process.
III. Why Recycle Scrap Compressors?
Discarding an old compressor is a lose-lose situation for both the environment and your wallet. However, suitable recycling creates a double win. Here’s why it matters.
1. Environmental Protection
When compressors are sent to a landfill, a significant environmental threat occurs:
- Landfill Burden: Heavy, bulky design means occupying a massive amount of limited landfill space.
- Harmful Emissions: Many compressors contain residual refrigerant, a potent greenhouse gas, if released, contributes to ozone layer depletion and global warming.
- Soil and Water Contamination: The waste lubricating oil inside may easily leak, seeping into the soil and polluting groundwater sources.
Recycling is the solution. By recovering valuable metals like copper, steel, and aluminum, we drastically reduce the need for virgin mining. In short, recycling compressors is a direct act of environmental protection.
2. Economic Value
Selling a whole compressor as simple “mixed scrap steel” is like selling a treasure box as the price of the lock. You are wating the sources.
- Core Value is Copper Windings: Copper is a always the high-value commodity, the clean, separated windings you can get higher profits than sell whole compressor directly.
- Additional Revenue Streams: The scrap steel casing and internal aluminum alloy components generate additional income after properly separated.
IV. How to Recycle Scrap Compressors?
Due to their robust construction, compressors cannot be directly processed by ordinary machines de recyclage de moteurs. Instead, you need to use specialized equipment to remove the outer casings and extract copper windings out. Specific recycling process is as follows:
Step 1: Cutting the Compressor Casing
You should conquer the hardened steel shell first which demands professional, powerful machines to cut safely and efficiently. We have designed two machines specifically for cutting compressor casings:
The Blades Compressor Cutting Machine is capable of cutting compressors with an outer diameter of 120-260mm. You can simply put the scrap compressor on the targeted platform and start up the cutting machine, then the compressor will be driven to rotate at a constant speed, and four high-hardness blades cut the outer case, only takes 2-3 minutes to finish.
Utilizes a high-temperature plasma laser to make precise cuts through the conductive metal shell. You can freely set the gun head position to adapt to different sizes of compressors, and it will automatically stop when the cutting is completed, taking only about 15″-25″:
- For a small compressor, cutting one time to finish;
- For a big long compressor, then you can set to cut from the bottom to up automatically.
Besides, the entire process takes place in a fully enclosed environment, completely protecting your safety.
Step 2: Manually Separate Components
The internal components are exposed after the outer casing is removed. You can manually separate the motor stator, the rotor, cylinders, pistons, bearings, and other parts.
Step 3: Recycling the Copper Winding
The real value lies here. After completing the above steps, you can use a specialized motor dismantling machine to recycle the copper windings inside the stator. Here, we recommend the most cost-effective model from BSGH Granulator.
For recycling scrap compressor stators, we recommend you Mini BSC compressor stator recycling machine, because compressor stators are almost all smaller, this machine is the best cost-effective machine, has a cutting part and a pulling part, capable of handling stators with a diameter of less than 120mm, just fit for it.
- Stator Dismantling Machine:
If you still have bigger stators, we strongly recommend our other electric motor stator cutting and pulling machine such as our BSM-100 Electric Motor Recycling Machine, BSM-40 scrap motor recycling machine, just invest depending on your practical stator diameter.
Step 4: Whole Compressor Recycling Line
If you own a big motor recycling center or waste management, our compressor recycling line is ideal for your investment. The recycling line is composed of a hammer mill, vibrating table and séparateur magnétique and the separation system, the whole industrial plant is able to improve your working efficiency and save a lot of time, You just need to put scrap on the conveyor belt and wait for end products market-ready iron and copper granules comes out, these final products you can sell at high price and boost your profit. Moreover, BSGH Granulator support to custom processing capacity from 1T to 5T per hour, totally meeting all your needs, so whatever you want, just feel free to contact us for more. Looking forward to your inquiry.
V. Conclusion
In brief, recycling compressor has dual benefits, not only helping conserve valuable resources, but also bringing strong economic returns. For recyclers, applying the right methods and technology can turn scrap compressors from waste into profit.
Thus, as a professional recycling solution provider, you can expect from Granulateur BSGH:
- Doubled Profitability: Achieve significantly higher revenue by recovering cleaner, higher-grade copper windings that is able to sell at top market prices.
- Maximum Metal Recovery: Ensure you capture almost 100% of the copper, aluminum, and steel, leaving no value behind.
- Safer & More Efficient Operations: All recycling machine follows the rule: Safety comes first, making your laborers a safe working environment.
Stop losing value in your scrap compressors now, our technology helps you make your recycling process more efficient, sustainable, and profitable.
Links:
French 
English 
Spanish 
Portuguese 
German 
