Machine de broyage de fils de cuivre BS-D10

Machine de déchiquetage de fil de cuivre BS-D10 à meilleur taux de recyclage

Catégories Série D, Machine de granulation de petite capacité

Machine de déchiquetage de fil de cuivre BS-D10 à meilleur taux de recyclage

100KG/H processing capacity, if you need a larger capacity, BS-D20 wire shredder is another choice.
Main crusher blades are made of SKD-11, wear and impact resistant, serve for longer time.
99.9% copper recycling rate in a voie physique peut vous aider à obtenir du cuivre brillant.
Small model among D series copper wire shredder, low price, capable of handling your car wire harness.
Equipped with 11kw main crusher and 310-350mm feeding hole.

products details

BS-D10 copper wire shredder is a compact cable recycling machine designed to process up to 100 kg of scrap wire per hour. It handles a wide range of wires, including automotive wiring harnesses, communication cables, and other home copper wires. BS-D10’s compact design and simple operation make it an ideal choice for small copper recycling businesses and scrap yards with limited space or manpower.

video description

The factory testing video shows a Machine de déchiquetage de fil de cuivre BS-D10 running smoothly for our Indonesian customer, Iran.

Power Supply: 380V / 50Hz / 3 Phase
Configuration: Configuration standard

During the test, we fed a mixture of thin scrap wires with fine copper conductors. Despite the small wire size, BS-D10 achieved excellent separation results: the recovered copper was clean with almost no visible plastic, while almost no copper was found in the plastic outlet.

Iran was very satisfied with the testing results. His BS-D10 is now operating smoothly, helping him recover more copper from thin scrap wires, and improve the return from his cable recycling business.

BS-D10 professional Copper wire shredder machine Data

According to customers’ feedback, it is hard to distinguish BS-D10, BS-D20 and BS-D30 copper shredder because of their similar appearance. So we compared these three machines here to help you choose. The biggest capacity among three machines is about 300KG/H, if you need bigger one, welcome to check our machines de grande capacité et machines de capacité moyenne.

Affichage de la machine

Modèle	Broyeur de fils de cuivre BS-D10	BS-D20 wire shredder machine	BS-D30 copper shredder
Capacité	100 kg/heure	200 kg/heure	300 kg/heure
Taille	223016002000mm	260016002000mm	270021002300mm
Pouvoir	24 kW	28 kW	Environ 37,2 kW
Poids	1800 kg	Environ 2000 kg	3500 kg
Configuration	Has the smallest feeding hole among three machines	Has middle feeding hole among three machines	Has the biggest feeding hole among three machines

Main components of BS-D10 small copper wire shredder machine

Main part of breaking scrap cables. And we use SKD-11 high hardness blades, which can crush the scrap cables well and reduce machine wear.

Concasseur principal

Using the principle of copper and plastic's different densities. Separate the scrap cable granules by airflow and gravity, it is the first separating process.

Séparateur d'air

Second separation step, removing copper from plastic by vibrating, it usually cooperates with air separator

Petite table vibrante

How to Recycle Copper from BS-D10 copper shredding machine?

Recycling scrap cables with BS-D10 copper wire shredder machine is a simple four-step process.
1. Crushing
Scrap cables are fed into BS-D10, where the main crusher cuts and granulates them into small copper and plastic particles.
2. Air Separation
The crushed material then enters the air separator. By using the density difference between copper and plastic, most of the two materials are separated efficiently.
3. Fine Separation
Any remaining mixed particles pass through a small vibration table for further separation, helping recover residual copper and improve the final purity.
4. Final Collection
After separation, clean copper granules and plastic are discharged through separate outlets, ready for collection, reuse, or further recycling.

BS-D10 homeuse copper wire shredder Working Video

Liste de lecture

4 Videos

Copper Cable Recycling Machine Crush And Separate Plug Wires Output Brass | BSGH Good Feedback Video

0:38

100~150kg/h Copper Wire Separator Machine BS-D10 | 100% Recovery Rate Cable Recycling Machine

0:41

Single-phase Home Wire Granulator For Scrap Cable Recycling | Small Cable Recycling Machine For Sale

0:30

Best Performance Copper Wire Separator Machine With 99.99% Copper Recovery Rate

1:52

Emballage et livraison

As a small size machine, we pack BS-D10 copper shredder with plastic inside and plywood outside. And we will track package information until you receive the machine.

Commentaires des clients

Customer satisfaction is the most convincing evidence of machine quality. Nothing makes us prouder than the more money our customers can make with our machines. The comments below are using feelings of our regular customers.

Rated 5 out of 5

Bonne machine ! Je l'ai testée dès que je l'ai reçue. Elle fonctionne très bien. Et j'ai essayé de traiter différents câbles de récupération, elle peut aussi bien les traiter.

Mikus From Poland

Rated 5 out of 5

Really thanks for your recommendation and service. My client is so happy with the machine, I’m looking forward to cooperating with you again.

Francisco From Russia

Rated 5 out of 5

This is my first time buying a machine in China, it surprised me. Happy to see that copper and plastic granules are so pure.

Mike From Qatar

FAQ

I have different cables and would like to use an pre-shredder connected to BS-D10 copper wire shredder. If you have such an option, please send me information with the quote.

Surely we can assemble a pré-broyeur for BS-D10 copper wire shredder, but not recommended. Pre-shredder is mainly used for medium or bigger-size granulator machines. BS-D10 is a small capacity machine only 100kg/H, no need to add the pre-shredder.

Can I get pure copper from BS-D10 copper wire shredder in one time?

Yes, you can get pure copper at one time. Our BS-D10 copper wire shredder's copper separation rate is up to 99.9%, so the final product is pure enough.

I see plastic in copper granules from BS-D10 copper wire shredder, how to solve it?

Do not worry, you can fine-tune the airflow and vibration frequency until no plastic in copper. If still not work, just contact us freely, we are here to help you till problem solved.