Industrial Electric Motor Recycling Equipment for 50-500mm Motors
BSM-40 & BSM-50 double your scrap electric motor recycling efficiency and halve your labor:
• Perfect “Cut & Pull” solution for entire motor (Up to 500mm) in diameter.
• Best selling electric motor recycling equipment among American and European market.
• Hydraulic system driven and robust structure ensure a stable and durable performance.
Features of Industrial Electric Motor Recycling Equipment
Industrial Electric Motor Recycling Equipment offers a complete cutting and pulling solution for entire scrap motors ranging from 50mm to 500mm in diameter. By precisely cutting the motor case and stators and effectively extracting the copper winding, you can get 100% clean, market-ready copper coils.
- Hydraulic system provides high-torque power to process even the toughest cast-iron casings and hardest stators.
- Control lever allow operators to adjust pressure easily, simple to operate without complex training.
- Robust 3 cutter design capable of cracking casings and slicing through 500mm motor stators in a single pass.
- Advanced 8 jaws + 16 jaws + lifting plier pullers extract copper coils from 500mm stators cleanly, ensuring no copper loss.
- Freely customize Voltage, Motor Brand, Color, Claw Size, and Logo to suit your specific requirements.
- Both blades and claws are forged from high-strength alloy steel and heat-treated, built to last and significantly reducing your replacement costs.
Best electric motor recycling equipment for sale
Struggling to dismantle scrap motors efficiently? You are in the right place. Meet the “Golden Partners” of our motor recycling equipment: Machine de découpe à moteur BSM-50 et BSM-40 Stator Recycling Machine. Designed to work in perfect harmony, the powerful partner can handle your large scrap motors—from small household appliance units to heavy-duty industrial motors with diameters up to 500mm. Such a high-efficiency performance has made our BSM-40 & BSM-50 a top choice in global motor recycling market, particularly across America and Europe.
Machine de découpe à moteur BSM-50 is designed to handle motors with a maximum diameter of 500mm, performing the critical first step: precisely cutting the outer casing and splitting the internal stator to prepare for copper extraction.
1. Dual-Blade System: Precision Meets Power:
- Flat Blade:The Flat Blade targets the outer casing, cracking it open while keeping the internal stator without damage.
- Sharp Blade: Cuts the motor stator in half, making subsequent copper winding pulling process easily.
2. Low Maintenance, High Uptime
- Spend less time on repairs and more time on production. A quick grease and a simple electrical check are all it takes.
- With a low failure rate and durable frame, the cutter machine can run day in and day out, ensuring your profits steady.
Données techniques:
- Motor: 7.5KW
- Processing Range: 50-500MM
- Poids : 650 kg
- Application: Can cut all common scrap motors
The Ultimate All-in-One Solution BSM-40 motor stator recycling machine is built to maximize your scrap value by delivering a complete, high-speed separation of copper coils from steel cores. Powered by a heavy-duty hydraulic system, this 4-in-1 powerhouse built to handle everything from standard motors to heavy industrial scrap motor:
- Cutter: Cutting stator diameter under 180mm.
- 8-Claw Puller: Pulling stator diameter under 120mm.
- 16-Claw Puller: Pulling stator diameter under 180mm.
- Heavy-Duty Lifter: Pulling stator diamater up to 500mm.
- Equipped with an advanced dual-flow pump system, the back lifter can operate simultaneously with front grippers or cutter, allowing two operators to work at the same time, significantly boosting overall throughput.
- 4 foot pedals to control cutting and pulling operation.
Données techniques :
- Motor: 7.5KW
- Stator Diameter: Under 500MM
- Poids : 670 kg
- Application: Can pull all common scrap motors
50-500MM electric motor recycling equipment Work video
Witness the efficiency of our Industrial Electric Motor Recycling Equipment in action.
Just in one minute, BSM-50 et BSM-40 transform a scrap motor into profit. The seamless process can help you get 100% pure copper and clean steel cores, maximizing your resale value. See the standard operating procedure below:
Put the motor on BSM-50’s workbench. After starting the equipment, you can adjust control lever to make flat blade precisely cuts the motor casing. If you need to process a large-diameter motor, you can replace the sharp blade to cut the stator in half.
Place the stator on the cutting part of BSM-40, control foot switch to precisely slice one end of stator copper windings, and rotate the stator until completely cut off.
For small and medium-sized stators, you can control matched foot pedal to make the claws pull out copper coils directly. For large-diameter stators, you can use the rear lifting platform to remove copper windings out.
manual VS automatic dismantling
We know that upgrading to our industrial electric motor recycling equipment is a financial investment. But have you calculated the hidden costs of your current operation? The cost of low productivity, copper loss, and potential worker injuries increases higher than you think.
To help you make a wise decision, we have broken down the operational differences between using manual tools and investing our BSM-50 & BSM-40 electric Motor Recycling Machines. The following comparison highlights exactly where you are losing money—and how much you could be gaining.
| Fonctionnalité | Manual / Traditional Method | BSM-50 + BSM-40 |
| Gamme de traitement | Limited by worker strength | 50mm – 500mm (Industrial Standard) |
| Output Per Hour | 3-5 Motors | 30-80 Motors |
| Copper Recovery | Copper wires often break or stay stuck in the slots due to manual fatigue. | Hydraulic power pulls the entire winding out intact, maximizing your copper yield. |
| Safety | Great risk of injury | Hydraulic control lever + foot pedal minimizes injury risk |
As shown above, manual dismantling costs you time and money. Our machines maximize your daily output and copper recovery rate instantly. Most clients see a full ROI in just 1–2 weeks. Stop losing profit—upgrade to automation today.
Raw material and End Product
Process motors from 50mm to 500mm with ease. The BSM-50 & BSM-40 system extracts copper windings cleanly, preparing them perfectly for your next recycling stage.
you will have a pleasant experience with BSGH Granulator
Pourquoi nous choisir
Make BSGH your trusted partner in electric motor recycling. We offer the industry’s most extensive range of equipment, combining cutting-edge technology with unbeatable value. Choose us for premium quality, competitive pricing, and a long-term commitment to your business growth.
Comprehensive motor recycling machines
BSGH Granulator is one of the earliest and most professional manufacturers of motor recycling machines, mastering extensive experience and expertise. We not only provide recycling machines for common motors, but also have professional and mature recycling solutions for specialized motors such as compressors, transformers, car starters, and car alternators.
Real Data
All technical specifications, processing capacities, and functional descriptions of Industrial Electric Motor Recycling Equipment display on our website are accurate and valid. All pictures and operation videos are taken at our factory or at our customers’ locations. We never exaggerate machine output data, ensuring the equipment you receive fully matches your expectations.
Contrôle de qualité strict
Designed for the high-load, long-duration operation of the motor recycling industry, our machines feature a thickened steel body and high-strength alloy blades. Each machine undergoes rigorous performance testing and continuous operation trials before leaving the factory to ensure stability and reliability, extending the equipment’s lifespan.
Equipe professionnelle
We offer not only leading machines, but also attentive service and professional technical support. From equipment selection and operation procedure training to a one-year warranty and lifetime online technical support, our professional team will follow up throughout the process, promptly resolving any issues you may have about our machines, guaranteeing your investment achieves maximum value.
CE For Industrial Electric Motor Recycling Equipment
FAQ
Can the pressure of BSM-50 Industrial Electric Motor Recycling Equipment be customized?
Sorry, for standard BSM-50 the hydraulic pressure can not be customized but fixed between 20Mpa (equal to 30-40T), if you want bigger one, please contact our sales staff for customization.
Can the front two kinds claws of BSM-40 Industrial Electric Motor Recycling Equipment work at the same time?
No, the front 8-claw and 16-claw use same hydraulic system, so can't work at the same time, but the rear lifter can work with either of the two claws or the cutting part.
Can BSM-50 Industrial Electric Motor Recycling Equipment cut the out casing of compressor?
No, BSM-50 can only cut common motor shell, for compressors case, you need specialized plasma cutting machine ou knife cutting equipment.
Can I send you my motor first to test its recycling performance before making a purchase?
Of course, we are very welcome you to send your material to us, It's our pleasure to help you choose a suitable machine, and we'll also send you videos about machine processing your materials for your reference.
Can I buy BSM-40 Industrial Electric Motor Recycling Equipment without BSM-50?
Yes, surely. However, BSM-40 requires to remove the motor outer shell first. If you have tools to cut the casing efficiently, only buy BSM-40 is ok, if not, BSM-50 is highly recommended to handle the tough prep work.
How does Industrial Electric Motor Recycling Equipment handle motors with hardened varnish/glue?
BSM-40 is equipped with a high-torque hydraulic system. The claws can grip tight and rip through the varnish/glue, forcibly extracting the winding without slipping. Besides, if your scrap motors ever repaired or feeding glue in it, you'd better buy motor stator heating machine for optimal recycling.
Does the Industrial Electric Motor Recycling Equipment need a professional engineer to operate ?
No. Our Industrial Electric Motor Recycling Equipment is designed for easy use. Even a new hand can be trained to operate the full system safely in less than an hour.
French 
English 
Spanish 
Portuguese 
German 
