Factory Price | Best Cost-performance | Multifunction

Heavy Duty Metal Baling Machine

Play Video about Scrap Metal Baler Machine for baling multi-metal scraps from BSGH-banner image

Overview

As scrap-metal-baler introduced, All the metal baling machines from BSGH Granulator can be operated through hydraulic driving and can be controlled manually or through PLC automatic control. This type of metal baling press machine doesn’t need foot-screw installation, and a diesel engine can be provided as power where electricity is not available. Moreover, the feed box size and bale size can be customized to fit specific customer needs based on raw material specifications.

After metal scraps filled into press box, hydraulic system will squeeze and impact on the metal scraps to shape the scraps into the shape of the inner cavity of the press box, and then get bales by lifting. This baling method need to use an auxiliary tool grabber to grab the bales increasing your invest costs.

To solve the problem and meet your greater metal scraps recycling needs, we recommend HCBS81/T-3150(315T) | HCBS81/T-4000(400T) Metal Baling Machine.

315T Scrap Metal Baling Press Machine

Learn More

400T Hydraulic Baler Machine

Learn More

metal bailing machine datas

Our metal baling machine consists of a hydraulic system and a main machine; different cylinders besides a main cylinder, side cylinders, top cover cylinder and a small door cylinder, different pressure balers, may have different quantities of cylinders. The main function is mainly for baling different kinds of scrap metals into baler in order to reduce the storage cost and transport costs.

No.	Item		HCBS81/T-3150(315T)	HCBS81/T-4000(400T)
1	Main Cylinder	Model	YG400/280-2190	YG450/340-2450
		Quantity(PCS)	1
		Nominal Force(KN)	3150	4000
		Stroke(MM)	2190	2450
2	Side Cylinder	Model	YG280/200-1430	YG320/220-2450
		Quantity	2	2
		Nominal Force(KN)	1600	2000
		Stroke(MM)	1430	2450
3	Top Cover Cylinder	Model	YG220/140-1682	YG280/200-1850
		Quantity	1	1
		Nominal Force(KN)	1000	1600
		Stroke(MM)	1682	1850
4	Small Door Cylinder	Model	YG160/100-660	YG160/100-660
		Quantity	1	1
		Nominal Force(KN)	125	250
		Stroke(MM)	660	660
5	Press Box Size(MM)		200017501200	250017501200
6	Bale Size(MM)		(450-800)600600	(-1200)600600
7	Hydraulic System Pressure(MPa)		21.5
8	Cycle Length(Sec)		Appr. 120	Appr. 150
9	Hydraulic Pump	Model	250YCY14-1B	HY250Y-RP
		Quantity(Set)	2
		NOminal Outflow(ml/r)	250
		Nominal Pressure(MPa)	31.5
10	Motor	Model	Y280S-6	Y225M-6
		Quantity(Set)	2
		NOminal Speed(rpm)	980
		Nominal Power(KW)	45

Note: Normally, the baling methods of our machines has various options like front pushing-out push-out, turn out, depending on your preference. However, 315T and 400T Scrap Metal Baling Machines has so large capacity that may be necessary to equip dual main cylinders to support pushing-out, and for 400T baling press machine, we also recommend you to select pushing out baling method as its more durable, or you can use grabbing machine to catch the bale to prevent it from falling apart.

Advantages

+ All moving parts are hydraulically driven, with stable operation, high baling pressure, tight baling and high baling efficiency.

+ The guard board is installed on the gate, which is more wear-resisting and durable to extend service life.

+ Equipped with cushion valve, when the cover is lowered to 45 degrees, the machine will slow down to protect the machine.

+ Use the high pressure soft oil pipe, which is better anti-vibration, better resistance to leaking.

+ The machine is provided with remote controller, the PLC program control is simple and easy to learn, the performance is reliable, and a person can operate independently.

Operating Tips

Correct operation is the first condition for long-lasting service of the machine. Only by operating the baling machines according to the following principles can they complete the scrap metal baling task on schedule with optimal quality.

1.The operator should understand the equipment operating procedures and precautions, and should close the upper box lid door before starting to bale.

2.The machine should be started to idle for more than 5 minutes to check whether the oil level is sufficient, whether the oil pump sound is normal, and whether there is any leak in the hydraulic unit, pipes, joints, and pistons.

3.If you choose the manual operating method, then during the baling process, quickly push the hydraulic operating handle to the designated position, and return the valve handle to the normal neutral position for each operation.

4.When shutting down, the upper cover should be closed, the motor should be stopped, and the power supply should be cut off.

5.After the machine completes operation, all hydraulic cylinder rods should be retracted to prevent dust from damaging the sealing rings and causing oil leakage.

6.Regularly maintain the scrap metal baling machine, and if any oil leakage is found in the oil pipe, please repair it immediately.

Maintenance Tips

Considering that heavy-duty machines have greater durability, their daily maintenance is also particularly important. Now we will introduce to you the daily maintenance precautions for the two heavy-duty metal baling machines, 315T and 400T baler machines.

1.Hydraulic oil needs to be filtered before filling to maintain sufficient oil volume. The oil tank should be cleaned and the oil replaced every 6 months.

2.The debris in the press box should be cleaned once per one or two cycle.

3.Clean, maintain and fill the lubricating oil at the lubrication area at least once per cycle as required.

4.Once every 3 months, in addition to the above 3 tips, add some lubricating oil to all parts (shaft, center) and bearings.

5.Please note that several parts should not be refueled: the feed and return rollers, all belts and surrounding areas.

6.When the machine is abnormal at the working process, shut it down immediately to troubleshoot the cause of the failure.

7.During the machine working, it is not allowed to repair or touch the machine moving parts.

8.It is strictly forbidden to press the raw materials in the bale pressing box with your hands or feet.

Contact Us

As a leading manufacturer who specializes in metal bailing machine production, we always deliver top-quality solutions customized with your unique needs. Whether you require assistance with selecting the right machine for your operations or have inquiries about our specific machine, our professional team is here to support you every step of the way.

This form is totally secure so please don’t worry and send an email to tell us your scrap metal baling and recycling needs.

Raw Materials & Final Products

315T and 400T baling machines can process all steels that BSGH Granulator Medium Scrap Baler Machines and aluminum can baler could handle.

For Aluminum Can Baler Machine

For Scrap Metal Baling Press Machine

Package & Delivery

315T and 400T Baling Press Machines are all packed with 1*40″FR +1*40″OT+1*40″HQ.

metal Baling Machines at BSGH Granulator

Strict Quality Controlling

At the BSGH Granulator factory, there are sufficient on-site inspector testing machinery to guarantee the excellence of every baling machine we manufactured. Ensuring the highest quality scrap metal recycling machines is our utmost priority. Our machines come with SGS/BV/CCIC inspection certificates for quality assurance, and we’re open to third-party testing as well.

Great Feedback

Our customers are all over the world, and good reviews come from all over the world. We select some of them as following:

Perfect Producing procedure

The manufacturing process of our metal baling machines is somewhat complicated. But we still have extracted several key steps to give you insight into how our scrap metal baling press machines are made. Each step is vital, meticulously carried out to ensure the quality that has earned us at least a 70% share of the Chinese market.

Bending

We start our production line with precision bending process. Raw metal sheets will undergo careful shaping and formation to satisfy the specific requirements of our large-scale metal balers. With advanced bending techniques, we make sure that every component attains the best structural strength and dimensional precision.

Cutting

This is where raw materials are skillfully trimmed into appropriate components for our machines. We use cutting-edge cutting equipment(like laser cutting) that gives clean cuts— allowing us easy assembly and get high performance in the end products.

Drilling

A major step in the manufacturing process of our large metal baling machines is precisely drilling. Highly skilled workers use advanced machinery during this operation, to ensure that holes are made accurately and in right places: components fit properly after assembly which ensures high operational efficiency.

Heating

In this phase, blades and locking head also some related parts are heat-treated so as to be stronger and more durable. In this way we ensure reliable mechanical properties — through controlling temperature precisely and using appropriate heat treatment techniques for critical parts — that will guarantee proper functionality of our machines with a longer lifespan while also maintaining performance at peak levels.